Contact Form.

ShibataFenderTeam Group

Please calculate 3 plus 5.

* Mandatory fields

Your data will be used for the purpose of dealing with your enquiry and for marketing purposes. Your data will not be passed on to third parties and will only be handled internally at ShibataFenderTeam by authorized persons. We take the protection of your personal data very serious

Contact us

Shibata Fender Team

Accessories & Fixings.

Chain System.

Most fender systems with steel panels require chains for weight support and to limit tension and shear in the rubber unit.
A typical SFT chain system consists of compatible items to allow optimal performance of the fender system.


These are:

  • Anchor bolts
  • Brackets
  • Washers & Washer Plates
  • Bolts & Nuts
  • Shackles
  • Chain tensioner (recommended)
  • Chain

Chains.

SFT usually supplies open link chains, stud link chains are available on request. It is recommended to use chain tensioners.

 

 

Chain Dimensions
  Chain 4xd       Chains 5xd       K2 K3
Ø d
[mm]
t
[mm]
b1
[mm]
b2
[mm]
Weight
[kg / m]
t
[mm]
b1
[mm]
b2
[mm]
Weight
[kg / m]
MBL
[kN]
MBL
[kN]
14 56 20 48 3.8 70 21 49 3.7 124 154
16 64 22 54 5.0 80 24 56 4.8 160 202
18 72 25 61 6.3 90 27 63 6.0 209 262
20 80 28 68 7.8 100 30 70 7.5 264 330
22 88 31 75 9.4 110 33 77 9.0 304 380
25 100 35 85 12.1 125 38 88 11.6 393 491
28 112 39 95 15.2 140 42 98 14.6 492 616
30 120 42 102 17.4 150 45 105 16.7 566 706
32 128 45 109 19.8 160 48 112 19.0 644 804
35 140 49 119 23.8 175 53 123 22.8 770 964
38 152 53 129 28.0 190 57 133 26.9 900 1,130
40 160 56 136 31.0 200 60 140 29.8 1,010 1,260
45 180 63 153 39.3 225 68 158 37.7 1,275 1,590
50 200 70 170 48.5 250 75 175 46.5 1,570 1,960

Chain Tensioners.

ShibataFenderTeam recommends to use chain tensioners.

 

 

Shackles.

Shackles are available in two types, D Type and Bow Type. 

 

Shackle Dimensions
          D-Type   Bow-Type    
WLL
[t]
Ø A
[mm]
Ø B
[mm]
Ø C
[mm]
E
[mm]
D1
[mm]
Weight
[kg]
D2
[mm]
F2
[mm]
Weight
[kg / m]
2.0 13 16 34 22 43 0.4 51 32 0.4
3.25 16 19 40 27 51 0.7 64 43 0.8
4.75 19 22 47 31 59 1.1 76 51 1.3
6.5 22 25 53 36 73 1.5 83 58 1.9
8.5 25 28 60 43 85 2.6 95 68 2.8
9.5 28 32 67 47 90 3.3 108 75 3.8
12.0 32 35 74 51 94 4.7 115 83 5.3
13.5 35 38 80 57 115 6.2 133 95 7.0
17.0 38 42 84 60 127 7.6 146 99 8.8
25.0 45 50 104 74 149 12.8 178 126 15.0

Brackets.

Brackets are available in several types, such as the frequently used cast-in bracket or various bolt / weld on brackets.

 

Fixings.

Only properly fixed fenders ensure worry free operation. SFT supplies anchors for new and existing concrete in different sizes, qualities and finishes. 

Cast-in Anchors.

Cast-in Anchors are used for new concrete. They consist of a socket and a tail with square washer plate. Cast-in Anchors are available in different sizes and finishes, as well as stainless steel or galvanized. 

Cast-in Anchor Dimensions
Anchor
Size
L
[mm]
B
[mm]
C
[mm]
D
[mm]
Weight
[kg]
M20 214 50 20 30 0.8
M24 258 60 25 35 1.5
M30 318 70 30 45 2.4
M36 328 80 40 55 3.7
M42 416 85 45 65 6.0
M48 431 100 50 75 9.0
M56 436 105 60 85 14.0
M64 600 128 80 100 23.0
M76 700 152 90 114 42.0

Chemical Anchors.

The Chemical Anchor is used for existing concrete or where Cast-in Anchors should be avoided. The threaded rod of the anchor is bonded with special grout into a drilled hole. They are  available in different sizes and finishes, as well as stainless steel or galvanized. 

Chemical Anchor Dimensions
Anchor
Size
A
[mm]
D
[mm]
E
[mm]
Grout volume
[ml]
M16 140 18 13 18
M20 170 22 16 30
M24 210 28 19 66
M30 280 35 24 130
M36 360 42 29 232
M42 420 48 34 325
M48 460 55 38 460
M56 500 62 45 550
M64 560 70 51 725
M76 670 84 61 1,200

U Anchors.

U anchors are a common alternative to chain brackets and available in different sizes, capacities and material qualities as well as for new and existing concrete. 

 

 

Bolts, Nuts & Washers

Washers and Washer Plates are available in two types, DIN 125 and special plates for specific fender types (SPC, CSS, V, FE).

The supplied bolts and nuts are suitable for the designed anchors, typically in stainless steel or galvanised. 

Washer Dimensions
    DIN 125   Special washer plates for SPC-, CSS-, SX-, SX-P-, SH-Fender, FE  
Anchor
Size
ID
[mm]
OD
[mm]
G
[mm]
LxB
[mm]
D
[mm]
G
[mm]
Weight
[kg]
M16 17 30 3 - - - -
M20 21 37 3 50x45 22 5 0.08
M24 25 44 4 75x55 26 6 0.15
M30 31 56 4 85x65 32 6 0.30
M36 37 66 5 100x75 38 6 0.36
M42 45 78 8 150x90 45 9 0.97
M48 52 92 8 175x100 52 9 1.26
M56 62 105 10 185x125 62 10 1.85
M64 70 115 10 200x130 70 10 2.08
M76 80 130 12 230x150 80 12 3.30
Copyright © 2024. All Rights Reserved